Cameras that do not support ONVIF can usually be integrated directly via RTSP. Important: Only use this method if the camera cannot be integrated via ONVIF.
Note:
The default RTSP port is 554.
Make the following settings here:
RTSP URL |
The RTSP URL can be found in the manual, from the manufacturer or other documentation. .
Here the example for the Logiware IPC2101A: |
Name of the camera |
Enter your desired camera name. |
Username |
If authentication is required for camera access, please enter the user name here. |
Passwort |
Enter the password for the above authentication here. Please refer to the documentation of your camera manual for the default password. |
PTZ |
If the IP camera is a moving camera, a so-called PTZ camera (PTZ = pan/tilt/zoom), it can be conveniently operated via go1984. |
Outdoor camera |
Select whether the camera will monitor an indoor or outdoor area. The optimal presets for the corresponding surveillance scenario are then automatically selected. |
Allow all User access |
If this option is selected, all users stored in the user administration will get access to this camera. |